The ABCL is an electrode Amperometric sensor that operates on the Potentiostatic Amperometry method. This digital sensor
comprises integrated electronic circuits and microprocessors housed within its structure.
The ABCL housing is a robust Dust and Waterproof enclosure. Its design incorporates power and output isolation to guarantee
electrical safety. Additionally, it features an in-built protection circuit, enhancing its resistance to interference and enabling
adaptation to complex environments.
Facilitating communication through an RS-485 transmission interface, the sensor employs the MODBUS-RTU communication
protocol. This protocol, known for its simplicity and user-friendly nature, enables the sensor to output extensive electrode
diagnostic information, showcasing its intelligence.
With a low power consumption design, the sensor is suitable for a variety of usage scenarios. Furthermore, its internal memory
serves to store calibration and setting information, ensuring data preservation in the event of a power failure.
|Three electrode Amperometric free chlorine sensor. It operates based on the principle of Potentiostatic amperometry.
|0 to 20 mg/l
|+10 – 27 VDC
|At regular operation: 20 mA
|Max. 6 bar
|Optimum flow rate
|25 – 100 LPH
|-10 to 60 degree C
|Glass + POM
|Cable & Length
|polyurethane jacket, bare wires or waterproof Fisher
1 meter(standard), higher length on request
|Approx. 0.4 Kg (sensor + cable 1 metres )
- For no reagent and membrane in the Chlorine probe,
this sensor significantly lowers the operating cost and
- The sensor can work with all terminals that can
receive the RS485 signals.
- Dust and Water Proof Structure
- Temperature and pH Compensation
- Factory pre-calibration for easy setup and field calibration for more accuracy
• Chlorination System
• swimming Pool
• Drinking Water
• Monitoring Disinfectant dosing
• Monitoring Conditioning Agents