Off-Line Filter FGM 30 (60) / Pi 2728-57

Before putting hydraulic or lubrication systems into service, the entire system should be flushed. Depending on the application, low viscosity flushing oil or the actual operating oil may be used. The purpose of flushing the system is to protect system components externally via mobile filtration units to ensure residue from assembly is removed. However, these mobile filtration units are also used to for the initial system fill or when changing the oil. The filtration units are quiet and compact, with an easy to transport design.

  • Small size.
  • Low weight.
  • Low noise emission.
  • High vol. efficiency.
  • Good suction performance.
  • Gerotor principle.
  • Not susceptible to contamination.
  • Low pressure filter with a wide separation range and high filtration capacity.
Pump : Contaminant-resistant gerotor pump
Colour : Motor RAL 7024/frame RAL 5002
Operating fluids : Mineral oils per DIN 51524
Operating oil temperature : Max. 50 °C, briefly 65 °C
Seal : Perbunan (NBR), or Viton (FPM) on request